jsondecode
Bootrom start (CA) Boot Media: eMMC ############Timeout error. Failed to send the head frame. Failed to send the auxiliary code data.
Verify Key Area failed.
pok1800 I've never seen this problem before. You need to find someone else for help
pok1800 CPU: Hi3798Mv200 (CA) This version cannot be burned. https://bbs.histb.com/d/52-cpuca
jsondecode Hi jsondecode, Thank you for clarify issue this. Probably have solution in future.
要改网口 要不然不能用网口刷机啊 漫长的等待 改了后 十几分钟就好了 我用的是河北2910 和你的6910 好像可以一个包
518hl 我没改网口，用串口烧了9个多小时，烧成功了，但是开机没有ip，不知道是不是没改网口的原因
jsondecode开机后用ttl去改一下网卡的Mac和网络配置应该就好了，论坛有教程的。
jsondecode 能刷入能开机不能被这个小操作挡住了
Hi jsondecode, Can you help me, download fastboot for hi3798mv2dmf "https://pan.baidu.com/s/1lmQglQC4mwR2GnFDE93yeQ?pwd=fdts" . Please. Shares file with google drive or mediafire. I want test to my tv box. Many thank
pok1800 I do not have google drive,give me your e-mail address，I can send it to you by email.
jsondecode My Email : pok1800@hotmail.com
Hi1036 网络配置改了，改成静态ip也没用
jsondecode 不会是你这个盒子的硬件不在支持范围，系统驱动不了？
Hi1036 应该是支持的，有成功案例，只不过他们都焊接了网口
我刷成功，正常使用，必须去掉无线板！硬改网口！
cyqlxl 2910硬改网口有没有图片或教程能不能提供一下
