ec6108v9 Hi3798MV100_CA 1+4 请问有包可以支持吗？研究了好几天，各种文件拼接 能刷了但是启动不了，跑马可以看出 盒子在无限重启。
日志如下：
Bootrom start
Boot from eMMC
Initializing DDR ... OK
Starting DDR training ... OK
Starting fastboot ...
System startup
Reg Version: v1.1.0
ayers_emmc.reg
Reg Name: hi3798mdmo1d_hi3798mv100_ddr3_2gbyte_8bitx4_4layers_emmc.reg
Compressed-boot v1.0.0
Uncompress.....................Ok
System startup
Reg Version: v1.1.0
ayers_emmc.reg
Reg Name: hi3798mdmo1d_hi3798mv100_ddr3_2gbyte_8bitx4_4layers_emmc.reg
Fastboot 3.3.0-00361-gdaebe33-dirty (liuhh@HW-TV-S5) (Apr 29 2015 - 17:11:39)
Fastboot: Version 3.3.0
Build Date: Apr 29 2015, 17:12:08
CPU: Hi3798Mv100 (CA)
Boot Media: eMMC
DDR Size: 1GB
Check nand flash controller v610. found
Special NAND id table Version 1.36
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found!!!
MMC/SD controller initialization.
MMC/SD Card:
MID: 0x11
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 3776M Bytes (High Capacity)
Name: "004G6"
Chip Type: MMC
Version: 4.0
Speed: 25000000Hz
Bus Width: 8bit
Boot Addr: 0 Bytes
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
HI_OTP_LockIdWord,299: ID_WORD have already been locked
SDK Version: HiSTBAndroidV600R001C00SPC053_v2014101420
get key value 0x0
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 10485760
HI_Flash_Read Ret= 10485760
******** boot from kernel...********
[HMT]Verify kernel begin.
HI_Flash_Read Ret= 1024
HI_Flash_Read Ret= 1024
The kernel size is [7358464]
0e6ecf5d654ffc0a8cc01684e0a651a76f218b137e2a812256e0c6dc3c9162db
[HMT] RSA Verify the kernel Error.
[HMT] Check RSA ERROR!!
[HMT] The kernel verify failed.
HI_Flash_Read Ret= 512
HI_Flash_Read Ret= 512
Stb mac is : [5F:70:72:30:00:5F]
The mac is not a valid mac, use default mac.
Reserve Memory
Start Addr: 0x3FFFE000
Bound Addr: 0x8E40000
Free Addr: 0x3F8FC000
Alloc Block: Addr Size
0x3FBFD000 4194304
0x3F8FC000 3145728
Press Ctrl+C to stop autoboot
kernel @ ab3d5e87 (1284441904 bytes)
ramdisk @ fb241100 (-6491209 bytes)
page size @ -2061073454 bytes
*** irq: data abort
data abort
pc : [<a00001d3>] lr : [<00c2a13c>]
sp : 00bfffb8 ip : fac104b7 fp : fb241100
r10: 01ffbfc0 r9 : 87264392 r8 : 005fffe0
r7 : 00000002 r6 : 00161010 r5 : 00e04f40 r4 : 00ca3f30
r3 : ffffffff r2 : ff9cf3b7 r1 : d7543f49 r0 : fb241100
Flags: nzcv IRQs off FIQs off Mode UK12_32
Resetting CPU ...
resetting ...
?
Bootrom start
Boot from eMMC
Initializing DDR ... OK
Starting DDR training ... OK
Starting fastboot ...
System startup
Reg Version: v1.1.0
ayers_emmc.reg
Reg Name: hi3798mdmo1d_hi3798mv100_ddr3_2gbyte_8bitx4_4layers_emmc.reg
Compressed-boot v1.0.0
Uncompress.....................Ok
System startup
Reg Version: v1.1.0
ayers_emmc.reg
Reg Name: hi3798mdmo1d_hi3798mv100_ddr3_2gbyte_8bitx4_4layers_emmc.reg
Fastboot 3.3.0-00361-gdaebe33-dirty (liuhh@HW-TV-S5) (Apr 29 2015 - 17:11:39)
Fastboot: Version 3.3.0
Build Date: Apr 29 2015, 17:12:08
CPU: Hi3798Mv100 (CA)
Boot Media: eMMC
DDR Size: 1GB
Check nand flash controller v610. found
Special NAND id table Version 1.36
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found!!!
MMC/SD controller initialization.
MMC/SD Card:
MID: 0x11
