Press Ctrl+C to stop autoboot
(Re)start USB...
USB0: Register 1212 NbrPorts 2
USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
USB1: Register 1111 NbrPorts 1
USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
USB0: Host not halted after 16000 microseconds.
lowlevel init failed
scanning usb for storage devices... 1 Storage Device(s) found
reading hi_kernel.bin
...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
9102723 bytes read
Booting kernel from Legacy Image at 01ffffc0 ...
Image Name: Linux-4.4.35_s40
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 9102659 Bytes = 8.7 MiB
Load Address: 02000000
Entry Point: 02000000
Verifying Checksum ... OK
Host not halted after 16000 microseconds.
BUG: failure at xhci-mem.c:83/xhci_ring_free()!
resetting ...
*** CPU will be re▒
Bootrom start
Boot from eMMC
Starting fastboot ...
System startup
DDRS
Reg Version: v1.1.0
Reg Time: 2022/3/14 4:56:14
Reg Name: hi3798mdmo1g_hi3798mv100_ddr3_1gbyte_16bitx2_4layers_emmc.reg
Jump to DDR
Fastboot 3.3.0-dirty (ecoo@ecoo.top) (Mar 14 2022 - 11:35:29)
Fastboot: Version 3.3.0
Build Date: Mar 14 2022, 11:36:07
CPU: Hi3798Mv100
Boot Media: eMMC
DDR Size: 1GB
MMC/SD controller initialization.
MMC/SD Card:
MID: 0x90
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name: "H8G4a▒"
Chip Type: MMC
Version: 5.1
Speed: 52000000Hz
Mode: DDR50
Bus Width: 8bit
Boot Addr: 0 Bytes
Net: upWarning: failed to set MAC address
, downWarning: failed to set MAC address
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
ID_WORD have already been locked
SDK Version: HiSTBLinuxV100R005C00SPC061_20181030
Reserve Memory
Start Addr: 0x3FFFE000
Bound Addr: 0xF900000
Free Addr: 0x3FFFE000
Alloc Block: Addr Size
按照你给的全盘镜像刷完了，设置新的启动参数并保存，插入U盘重启后，无限重启是怎么回事，上边代码走完了又重新走，进不了系统，改为原版启动参数可以正常启动
