盒子型号：CM201-2 YS代工
刷写固件：fastboot-hi3798mv3dms1-64
刷机方式：TTL
遇到的问题：ttl正常刷入固件后，能直接进入后台，但断电重启盒子后，板子不亮灯、hdmi输出黑屏。ttl报错信息如下：
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Jul 28 2018 - 18:30:32
Reg Version: v1.5.0\
Reg Time: 2017/12/19 19:06:24
Reg Name: hi3798mv3dms1_hi3798mv300_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
Bootrom success
System startup
Relocate Boot
Jump to C code
Fastboot 3.3.0_ecoo_83081868-dirty (ecoo@histb) (Aug 18 2023 - 09:09:51)
Fastboot: Version 3.3.0
Build Date: Aug 18 2023, 09:10:31
CPU: Hi3798Mv300
Boot Media: eMMC
DDR Size: 1GB
MMC/SD controller initialization.
scan edges:2 p2f:5 f2p:7
mix set temp-phase 2
scan elemnts: startp:78 endp:76
Tuning SampleClock. mix set phase:[02/07] ele:[05/12]
MMC/SD Card:
MID: 0x70
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7296M Bytes (High Capacity)
Name: "T22708"
Chip Type: MMC
Version: 5.0
Speed: 100000000Hz
Mode: HS400
Voltage: 1.8V
Bus Width: 8bit
Boot Addr: 0 Bytes
Net: up, down, gmac0
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
SDK Version: HiSTB_com_NAS_ubuntu_20220427
Reserve Memory
Start Addr: 0x3FFFE000
Bound Addr: 0xF900000
Free Addr: 0x3F4F9000
Alloc Block: Addr Size
0x3FFFB000 0x2000
0x3FF7A000 0x80000
0x3FF49000 0x30000
0x3FE88000 0xC0000
0x3F69D000 0x7EA000
0x3F699000 0x3000
0x3F503000 0x195000
0x3F4F9000 0x9000
Press Ctrl+C to stop autoboot
MMC read: dev # 0, block # 28672, count 81920 ... 81920 blocks read: OK
124447257 Bytes/s
Load fip from 0x1FFFFC0 ...
Firmware Image Package ToC:
- EL3 Runtime Firmware BL3-1: offset=0x88, size=0x7020
- Non-Trusted Firmware BL3-3: offset=0x70A8, size=0x15537F2
---------------------------
Create Entry Point info ...
Get - EL3 Runtime Firmware BL3-1
Get - Non-Trusted Firmware BL3-3
bl33_ep->spsr = 0x3C5
ATAGS [0x00000100 - 0x00000430], 816Bytes
Move bl31 img from 0x02000048 to 0x4400000, 28704 Bytes
Start Warm Reseting
NOTICE: BL31: v1.2(debug):c65dfb89
NOTICE: BL31: Built : 13:22:17, Aug 12 2023
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to secure world
INFO: Entry point address = 0x20070a8
INFO: SPSR = 0x3c5
DTB: 03557070 00077810 000037ea
Kernel: 020081c8 00080000 0154eea8
booting the arm64 kernel.
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.35_ecoo_83081268 (ecoo@histb) (gcc version 6.5.0 (gcc-6.5 + glibc-2.27 (Build by ecoo.top Tue 23 Aug 2022 07:13:04 PM CST)) ) #1 SMP Sat Aug 12 13:21:58 CST 2023
Boot CPU: AArch64 Processor [410fd034]
initmrd: found no initmrd.
Memory limited to 1024MB
cma: Reserved 48 MiB at 0x000000003c400000
cma: Reserved 4 MiB at 0x000000003c000000
psci: probing for conduit method from DT.
psci: PSCIv1.0 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
PERCPU: Embedded 21 pages/cpu @ffffffc03fed5000 s45592 r8192 d32232 u86016
Detected VIPT I-cache on CPU0
CPU features: enabling workaround for ARM erratum 845719
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048
Kernel command line: console=ttyAMA0,115200 root=/dev/mmcblk0p9 rootfstype=ext4 rootwait blkdevparts=mmcblk0:1M(boot),1M(bootargs),4M(baseparam),4M(pqparam),4M(logo),40M(kernel),64M(busybox),512M(backup),-(ubuntu) mem=1G mmz=ddr,0,0,48M vmalloc=500M
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 12288 bytes
log_buf_len min size: 16384 bytes
log_buf_len: 32768 bytes
early log buf free: 14408(87%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
software IO TLB [mem 0x36e00000-0x3ae00000] (64MB) mapped at [ffffffc036e00000-ffffffc03adfffff]
Memory: 875868K/1048576K available (14846K kernel code, 1339K rwdata, 4640K rodata, 960K init, 2747K bss, 119460K reserved, 53248K cma-reserved)
Virtual kernel memory layout:
modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
.init : 0xffffff8009390000 - 0xffffff8009480000 ( 960 KB)
.text : 0xffffff8008080000 - 0xffffff8008f00000 ( 14848 KB)
.rodata : 0xffffff8008f00000 - 0xffffff8009390000 ( 4672 KB)
.data : 0xffffff8009480000 - 0xffffff80095ceea8 ( 1340 KB)
vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
0xffffffbdc0000000 - 0xffffffbdc1000000 ( 16 MB actual)
fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU debugfs-based tracing is enabled.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:64 nr_irqs:64 0
Architected cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys pids
ftrace: allocating 48830 entries in 191 pages
sched-energy: CPU device node has no sched-energy-costs
Invalid sched_group_energy for CPU0
CPU0: update cpu_capacity 1024
ASID allocator initialised with 65536 entries
CPU: hi3798mv300
Detected VIPT I-cache on CPU1
Invalid sched_group_energy for CPU1
CPU1: update cpu_capacity 1024
CPU1: Booted secondary processor [410fd034]
Detected VIPT I-cache on CPU2
Invalid sched_group_energy for CPU2
CPU2: update cpu_capacity 1024
CPU2: Booted secondary processor [410fd034]
Detected VIPT I-cache on CPU3
Invalid sched_group_energy for CPU3
CPU3: update cpu_capacity 1024
CPU3: Booted secondary processor [410fd034]
Brought up 4 CPUs
SMP: Total of 4 processors activated.
CPU: All CPU(s) started at EL1
alternatives: patching kernel code
Invalid sched_group_energy for Cluster3
CPU3: update max cpu_capacity 1024
Invalid sched_group_energy for Cluster2
Invalid sched_group_energy for Cluster1
Invalid sched_group_energy for Cluster0
devtmpfs: initialized
CPU2: update max cpu_capacity 1024
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
xor: measuring software checksum speed
8regs : 1524.000 MB/sec
8regs_prefetch: 1356.000 MB/sec
32regs : 1868.000 MB/sec
32regs_prefetch: 1576.000 MB/sec
xor: using function: 32regs (1868.000 MB/sec)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
vdso: 2 pages (1 code @ ffffff8008f06000, 1 data @ ffffff8009484000)
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
DMA: preallocated 256 KiB pool for atomic allocations
Serial: AMBA PL011 UART driver
f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 24, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
uart-pl011 f8b02000.uart: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 25, base_baud = 0) is a PL011 rev2
uart-pl011 f8b03000.uart: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 26, base_baud = 0) is a PL011 rev2
pl061_gpio f8b20000.gpio0: PL061 GPIO chip @0x00000000f8b20000 registered
pl061_gpio f8b21000.gpio1: PL061 GPIO chip @0x00000000f8b21000 registered
pl061_gpio f8b22000.gpio2: PL061 GPIO chip @0x00000000f8b22000 registered
pl061_gpio f8b23000.gpio3: PL061 GPIO chip @0x00000000f8b23000 registered
pl061_gpio f8b24000.gpio4: PL061 GPIO chip @0x00000000f8b24000 registered
pl061_gpio f8004000.gpio5: PL061 GPIO chip @0x00000000f8004000 registered
pl061_gpio f8b26000.gpio6: PL061 GPIO chip @0x00000000f8b26000 registered
pl061_gpio f8b27000.gpio7: PL061 GPIO chip @0x00000000f8b27000 registered
pl061_gpio f8b28000.gpio8: PL061 GPIO chip @0x00000000f8b28000 registered
pl061_gpio f8b29000.gpio9: PL061 GPIO chip @0x00000000f8b29000 registered
raid6: int64x1 gen() 300 MB/s
raid6: int64x1 xor() 306 MB/s
raid6: int64x2 gen() 457 MB/s
raid6: int64x2 xor() 400 MB/s
raid6: int64x4 gen() 667 MB/s
raid6: int64x4 xor() 496 MB/s
raid6: int64x8 gen() 781 MB/s
raid6: int64x8 xor() 494 MB/s
raid6: neonx1 gen() 496 MB/s
raid6: neonx1 xor() 507 MB/s
raid6: neonx2 gen() 792 MB/s
raid6: neonx2 xor() 693 MB/s
raid6: neonx4 gen() 1039 MB/s
raid6: neonx4 xor() 794 MB/s
raid6: neonx8 gen() 1101 MB/s
raid6: neonx8 xor() 822 MB/s
raid6: using algorithm neonx8 gen() 1101 MB/s
raid6: .... xor() 822 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
hisi_iommu_ptable_addr:phy 0x35800000 size:0x400000
hisi_iommu_err_rdaddr :phy 0x36273e00 size:0x200
hisi_iommu_err_wraddr :phy 0x36070000 size:0x200
in hisi_iommu_domain_init start
in hisi_iommu_domain_init end
SCSI subsystem initialized
ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022
ssp-pl022 f8b1a000.spi: mapped registers from 0x00000000f8b1a000 to ffffff8008076000
spi_master spi32766: will run message pump with realtime priority
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource arch_sys_counter
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
kvm [1]: HYP mode not available
futex hash table entries: 1024 (order: 5, 131072 bytes)
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ntfs: driver 2.1.32 [Flags: R/W].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
crc32: self tests passed, processed 225944 bytes in 837375 nsec
crc32c: CRC_LE_BITS = 64
crc32c: self tests passed, processed 225944 bytes in 418375 nsec
crc32_combine: 8373 self tests passed
crc32c_combine: 8373 self tests passed
xz_dec_test: module loaded
xz_dec_test: Create a device node with 'mknod xz_dec_test c 251 0' and write .xz files to it.
hiahci-phy: registered new sata phy driver
virtual device initialization.
Mali: Mali device driver loaded
misc hi_dbe: hi_dbe ready
Unable to detect cache hierarchy from DT for CPU 0
brd: module loaded
loop: module loaded
ahci: probe of f9900000.hiahci failed with error -1
hifmc100: registerd new interface driver hifmc100.
hifmc100: Found flash memory controller hifmc100.
hifmc100: no found spi-nor device.
hifmc100: no found nand device.
hifmc100: no found spi-nand device.
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
FEPHY:addr=2, la_am=0xd, ldo_am=0x4, r_tuning=0x1a
libphy: himii: probed
hi_eth: attached port 0 PHY 2 to driver HiSilicon Festa s28v112
libphy: higmac_mii_bus: probed
Eth phy 1 has invalid OUI:0x0
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform: EHCI generic platform driver
ehci-platform f9890000.ehci: EHCI Host Controller
ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
ehci-platform f9890000.ehci: irq 34, io mem 0xf9890000
ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
ohci-platform f9880000.ohci: Generic Platform OHCI controller
ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
ohci-platform f9880000.ohci: irq 35, io mem 0xf9880000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00030010
xhci-hcd f98a0000.xhci: irq 37, io mem 0xf98a0000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver aircable
usbserial: USB Serial support registered for aircable
usbcore: registered new interface driver ark3116
usbserial: USB Serial support registered for ark3116
usbcore: registered new interface driver belkin_sa
usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
usbcore: registered new interface driver ch341
usbserial: USB Serial support registered for ch341-uart
usbcore: registered new interface driver cp210x
usbserial: USB Serial support registered for cp210x
usbcore: registered new interface driver cypress_m8
usbserial: USB Serial support registered for DeLorme Earthmate USB
usbserial: USB Serial support registered for HID->COM RS232 Adapter
usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
usbcore: registered new interface driver digi_acceleport
usbserial: USB Serial support registered for Digi 2 port USB adapter
usbserial: USB Serial support registered for Digi 4 port USB adapter
usbcore: registered new interface driver f81232
usbserial: USB Serial support registered for f81232
usbcore: registered new interface driver ipaq
usbserial: USB Serial support registered for PocketPC PDA
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver usb_serial_simple
usbserial: USB Serial support registered for carelink
usbserial: USB Serial support registered for zio
usbserial: USB Serial support registered for funsoft
usbserial: USB Serial support registered for flashloader
usbserial: USB Serial support registered for google
usbserial: USB Serial support registered for vivopay
usbserial: USB Serial support registered for moto_modem
usbserial: USB Serial support registered for novatel_gps
usbserial: USB Serial support registered for hp4x
usbserial: USB Serial support registered for suunto
usbserial: USB Serial support registered for siemens_mpi
usbcore: registered new interface driver visor
usbserial: USB Serial support registered for Handspring Visor / Palm OS
usbserial: USB Serial support registered for Sony Clie 5.0
usbserial: USB Serial support registered for Sony Clie 3.5
usbcore: registered new interface driver whiteheat
usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
usbip_core: USB/IP Core v1.0.0
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR XMP protocol handler initialized
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
registered new interface driver himciV2.0_4.4.35_ecoo_83081268_20170401
mmc0: MAN_BKOPS_EN bit is not set
scan edges:2 p2f:5 f2p:7
mix set temp-phase 2
scan elemnts: startp:78 endp:76
Tuning SampleClock. mix set phase:[02/07] ele:[05/12]
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 T22708 7.13 GiB
mmcblk0boot0: mmc0:0001 T22708 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 T22708 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 T22708 partition 3 4.00 MiB
mmcblk0: p1(boot) p2(bootargs) p3(baseparam) p4(pqparam) p5(logo) p6(kernel) p7(busybox) p8(backup) p9(ubuntu)
f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (6842 buckets, 27368 max)
ctnetlink v0.93: registering with nfnetlink.
nf_tables: (c) 2007-2009 Patrick McHardy kaber@trash.net
xt_time: kernel timezone is -0000
ip_set: protocol 6
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
IPVS: Creating netns size=1328 id=0
IPVS: ipvs loaded.
wireguard: WireGuard 1.0.20220627 loaded. See www.wireguard.com for information.
wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved.
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
Ebtables v2.0 registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
openvswitch: Open vSwitch switching datapath
mpls_gso: MPLS GSO support
Btrfs loaded
Key type encrypted registered
[00:00:03:507 ERROR-HI_I2C]:HI_DRV_I2C_Init[942]:i2c device not found, init failed: -1
console [netcon0] enabled
netconsole: network logging started
ALSA device list:
No soundcards found.
JBD2: Invalid checksum recovering block 1 in log
JBD2: Invalid checksum recovering block 1 in log
JBD2: recovery failed
EXT4-fs (mmcblk0p9): error loading journal
VFS: Cannot open root device "mmcblk0p9" or unknown-block(259,1): error -5
Please append a correct "root=" boot option; here are the available partitions:
0100 4096 ram0 (driver?)
0101 4096 ram1 (driver?)
0102 4096 ram2 (driver?)
0103 4096 ram3 (driver?)
0104 4096 ram4 (driver?)
0105 4096 ram5 (driver?)
0106 4096 ram6 (driver?)
0107 4096 ram7 (driver?)
0108 4096 ram8 (driver?)
0109 4096 ram9 (driver?)
010a 4096 ram10 (driver?)
010b 4096 ram11 (driver?)
010c 4096 ram12 (driver?)
010d 4096 ram13 (driver?)
010e 4096 ram14 (driver?)
010f 4096 ram15 (driver?)
b300 7471104 mmcblk0 driver: mmcblk
b301 1024 mmcblk0p1
b302 1024 mmcblk0p2
b303 4096 mmcblk0p3
b304 4096 mmcblk0p4
b305 4096 mmcblk0p5
b306 40960 mmcblk0p6
b307 65536 mmcblk0p7
103:00000 524288 mmcblk0p8
103:00001 6825984 mmcblk0p9
b318 4096 mmcblk0rpmb (driver?)
b310 4096 mmcblk0boot1 (driver?)
b308 4096 mmcblk0boot0 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(259,1)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.35_ecoo_83081268 #1
Hardware name: Hi3798Mv200 (DT)
Call trace:
[<ffffff8008088aa8>] dump_backtrace+0x0/0x1d0
[<ffffff8008088c9c>] show_stack+0x24/0x30
[<ffffff80085a7284>] dump_stack+0x94/0xb8
[<ffffff8008195394>] panic+0xe0/0x22c
[<ffffff8009391154>] mount_block_root+0x208/0x2b0
[<ffffff800939138c>] mount_root+0x74/0x84
[<ffffff8009391508>] prepare_namespace+0x16c/0x1b4
[<ffffff8009390d88>] kernel_init_freeable+0x228/0x248
[<ffffff8008eeac48>] kernel_init+0x20/0xf0
[<ffffff8008082690>] ret_from_fork+0x10/0x40
CPU2: stopping
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.4.35_ecoo_83081268 #1
Hardware name: Hi3798Mv200 (DT)
Call trace:
[<ffffff8008088aa8>] dump_backtrace+0x0/0x1d0
[<ffffff8008088c9c>] show_stack+0x24/0x30
[<ffffff80085a7284>] dump_stack+0x94/0xb8
[<ffffff800808e81c>] handle_IPI+0x274/0x2c0
[<ffffff8008080d34>] gic_handle_irq+0xac/0xc8
Exception stack(0xffffffc03ff03050 to 0xffffffc03ff03180)
3040: ffffffc0369e3e10 0000008000000000
3060: ffffffc0369e3f40 ffffff8008084aa4 0000000060000045 ffffff8009455ad0
3080: ffffffc0369e3f40 ffffffc0369e3e10 0000000000000000 0000000000000000
30a0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
30c0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
30e0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3100: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3120: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3140: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3160: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[<ffffff8008081fb4>] el1_irq+0xb4/0x140
[<ffffff8008084aa4>] arch_cpu_idle+0x64/0x128
[<ffffff800810085c>] cpu_startup_entry+0x1f4/0x2f8
[<ffffff800808e1a0>] secondary_start_kernel+0x148/0x1a0
[<00000000000828e8>] 0x828e8
CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.35_ecoo_83081268 #1
Hardware name: Hi3798Mv200 (DT)
Call trace:
[<ffffff8008088aa8>] dump_backtrace+0x0/0x1d0
[<ffffff8008088c9c>] show_stack+0x24/0x30
[<ffffff80085a7284>] dump_stack+0x94/0xb8
[<ffffff800808e81c>] handle_IPI+0x274/0x2c0
[<ffffff8008080d34>] gic_handle_irq+0xac/0xc8
Exception stack(0xffffffc03feee050 to 0xffffffc03feee180)
e040: ffffffc0369d7e10 0000008000000000
e060: ffffffc0369d7f40 ffffff8008084aa4 0000000060000045 ffffff8009455ad0
e080: ffffffc0369d7f40 ffffffc0369d7e10 0000000000000000 0000000000000000
e0a0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
e0c0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
e0e0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
e100: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
e120: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
e140: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
e160: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[<ffffff8008081fb4>] el1_irq+0xb4/0x140
[<ffffff8008084aa4>] arch_cpu_idle+0x64/0x128
[<ffffff800810085c>] cpu_startup_entry+0x1f4/0x2f8
[<ffffff800808e1a0>] secondary_start_kernel+0x148/0x1a0
[<00000000000828e8>] 0x828e8
CPU3: stopping
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.4.35_ecoo_83081268 #1
Hardware name: Hi3798Mv200 (DT)
Call trace:
[<ffffff8008088aa8>] dump_backtrace+0x0/0x1d0
[<ffffff8008088c9c>] show_stack+0x24/0x30
[<ffffff80085a7284>] dump_stack+0x94/0xb8
[<ffffff800808e81c>] handle_IPI+0x274/0x2c0
[<ffffff8008080d34>] gic_handle_irq+0xac/0xc8
Exception stack(0xffffffc03ff18050 to 0xffffffc03ff18180)
8040: ffffffc0369e7e10 0000008000000000
8060: ffffffc0369e7f40 ffffff8008084aa4 0000000060000045 ffffff8009455ad0
8080: ffffffc0369e7f40 ffffffc0369e7e10 0000000000000000 0000000000000000
80a0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
80c0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
80e0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
8100: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
8120: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
8140: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
8160: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[<ffffff8008081fb4>] el1_irq+0xb4/0x140
[<ffffff8008084aa4>] arch_cpu_idle+0x64/0x128
[<ffffff800810085c>] cpu_startup_entry+0x1f4/0x2f8
[<ffffff800808e1a0>] secondary_start_kernel+0x148/0x1a0
[<00000000000828e8>] 0x828e8
Kernel Offset: disabled
Memory Limit: 1024 MB
---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(259,1)
