`
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
lsadc voltage min: 000001A8, max: 000001B1, aver: 000001AC, index: 00000003
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Jul 27 2018 - 00:49:01
Reg Version: v1.5.2\
Reg Time: 2017/12/19 12:02:00
Reg Name: hi3798mv3dmm_hi3798mv300_DDR3-1866_1GB_16bitx2_4layers.reg
Boot auxiliary code success
Bootrom success
System startup
Relocate Boot
Jump to C code
Fastboot 3.3.0 (proj-hnX-hncatv__121760@join-r730-00) (Apr 23 2023 - 17:12:40)
Fastboot: Version 3.3.0
Build Date: Apr 23 2023, 17:13:23
CPU: Hi3798Mv300
Boot Media: eMMC
DDR Size: 1GB
LOGO Flag:e1a00000
Found flash memory controller hifmc100.
no found nand device.
MMC/SD controller initialization.
scan edges:2 p2f:4 f2p:6
mix set temp-phase 1
scan elemnts: startp:81 endp:77
Tuning SampleClock. mix set phase:[01/07] ele:[09/14]
MMC/SD Card:
MID: 0x45
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7636800K Bytes (High Capacity)
Name: "DG4008"
Chip Type: MMC
Version: 5.1
Speed: 100000000Hz
Mode: HS400
Voltage: 1.8V
Bus Width: 8bit
Boot Addr: 0 Bytes
Net: up, down, gmac0
Boot Env on eMMC
Env Offset: 0x00200000
Env Size: 0x00010000
Env Range: 0x00010000
SDK Version: gitServer_v2018121410
Normal logo
factory_check begin
chend---ir get:0
chend---ir get:0
chend---ir get:0
chend---ir get:0
chend---ir get:0
chend---ir get:0
chend---ir get:0
chend---ir get:0
chend---ir get:0
chend---ir get:0
properties buf_length=2000.
yuancheng flag_stbsn=0,flag_mac=0
HI_Flash_Open partion factory error
check remote recovery button begin
HI_UNF_IR_GetValue failed£¬ret:-1
hunan_mac=00:69:2D:4E:AD😃5
hunan_sn=0971080020170005014
serialno:0971080020170005014
stbid=DEVINFO!
hunan_mac=00:69:2D:4E:AD😃5
mac:00:69:2D:4E:AD😃5
Reserve Memory
Start Addr: 0x3FFFE000
Bound Addr: 0x8DA4000
Free Addr: 0x3EB88000
Alloc Block: Addr Size
0x3FBFD000 0x400000
0x3F8FC000 0x300000
0x3F8F9000 0x2000
0x3F8C8000 0x30000
0x3F897000 0x30000
0x3F598000 0x2FE000
0x3EDAD000 0x7EA000
0x3EDA9000 0x3000
0x3EC13000 0x195000
0x3EC09000 0x9000
0x3EB88000 0x80000
Press Ctrl+C to stop autoboot
MMC read: dev # 0, block # 159744, count 20480 ... 20480 blocks read: OK
159869897 Bytes/s
Found Initrd at 0x04000000 (Size 351716 Bytes), align at 16384 Bytes
Booting kernel from Legacy Image at 01ffffc0 ...
Image Name: Linux-3.18.24_hi3798mv2x
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 9098089 Bytes = 8.7 MiB
Load Address: 02000000
Entry Point: 02000000
XIP Kernel Image ... OK
OK
ATAGS [0x00000100 - 0x000004F4], 1012Bytes
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.24_hi3798mv2x (proj-hnX-hncatv__121760@join-r730-00) (gcc version 4.9.4 (gcc-linaro-4.9-2017.01 + glibc-2.27 Build by czyong Thu Mar 29 22:12:18 CST 2018) ) #1 SMP Sun Apr 23 17:10:58 CST 2023
CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
initmrd: found no initmrd.
Machine model: Hisilicon
cma: Reserved 44 MiB at 0x3bc00000
cma: Reserved 4 MiB at 0x3fc00000
Memory policy: Data cache writealloc
DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
PERCPU: Embedded 10 pages/cpu @debc1000 s11648 r8192 d21120 u40960
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261144
Kernel command line: console=ttyAMA0,115200 blkdevparts=mmcblk0:2M(fastboot),2M(bootargs),16M(recovery),2M(swdevinfo),8M(baseparam),8M(pqparam),8M(logo),32M(fastplay),16M(kernel),2M(misc),40M(trustedcore),8M(securestore),16M(properties),720M(cache),100M(private),100M(otapackage_tmp),824M(system),720M(otapackage),-(userdata) androidboot.serialno=0971080020170005014 initrd=0x4000000,0x55DE4 mem=1G mmz=ddr,0,0,44M
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 12288 bytes
log_buf_len min size: 16384 bytes
log_buf_len: 32768 bytes
early log buf free: 13944(85%)
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 957372K/1048576K available (13805K kernel code, 877K rwdata, 4484K rodata, 619K init, 2399K bss, 91204K reserved, 476784K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
lowmem : 0xc0000000 - 0xdf400000 ( 500 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc11e488c (18291 kB)
.init : 0xc11e5000 - 0xc127fd80 ( 620 kB)
.data : 0xc1280000 - 0xc135b7cc ( 878 kB)
.bss : 0xc135b7cc - 0xc15b370c (2400 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:352
Architected cp15 timer(s) running at 24.00MHz (phys).
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
Switching to timer-based delay loop, resolution 41ns
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
ftrace: allocating 45238 entries in 133 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0xc83220 - 0xc83278
CPU: hi3798mv300
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (192.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Serial: AMBA PL011 UART driver
f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 81, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 83, base_baud = 0) is a PL011 rev2
f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 84, base_baud = 0) is a PL011 rev2
pl061_gpio gpio0: PL061 GPIO chip @0xf8b20000 registered
pl061_gpio gpio1: PL061 GPIO chip @0xf8b21000 registered
pl061_gpio gpio2: PL061 GPIO chip @0xf8b22000 registered
pl061_gpio gpio3: PL061 GPIO chip @0xf8b23000 registered
pl061_gpio gpio4: PL061 GPIO chip @0xf8b24000 registered
pl061_gpio gpio5: PL061 GPIO chip @0xf8004000 registered
pl061_gpio gpio6: PL061 GPIO chip @0xf8b26000 registered
pl061_gpio gpio7: PL061 GPIO chip @0xf8b27000 registered
pl061_gpio gpio8: PL061 GPIO chip @0xf8b28000 registered
pl061_gpio gpio9: PL061 GPIO chip @0xf8b29000 registered
hisilicon-pcie: probe of f0001000.pcie failed with error -1
vgaarb: loaded
SCSI subsystem initialized
ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022
ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000
spi_master spi0: will run message pump with realtime priority
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
hisi_iommu_ptable_addr:phy 0x1d800000 size:0x400000
hisi_iommu_err_rdaddr :phy 0x1dea0c00 size:0x200
hisi_iommu_err_wraddr :phy 0x1dea0e00 size:0x200
in hisi_iommu_domain_init start
in hisi_iommu_domain_init end
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 344K (c4000000 - c4056000)
hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available
CPU PMU: attempt to register multiple PMU devices!
arm-pmu: probe of arm-pmu failed with error -28
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.283:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
msgmni has been set to 939
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
loop: module loaded
zram: Created 1 device(s) ...
hifmc100: registerd new interface driver hifmc100.
hifmc100: Found flash memory controller hifmc100.
hifmc100: no found spi-nor device.
hifmc100: no found nand device.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
FEPHY:addr=2, la_am=0xe, ldo_am=0x4, r_tuning=0x16
libphy: himii: probed
hi_eth: attached port 0 PHY 2 to driver HiSilicon Festa s28v112
platform f9840000.ethernet: Driver hi_gmac_v200 requests probe deferral
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
hiudc: version 3.00a 10-AUG-2012
Core Release: 3.10a
Setting default values for core params
Using Buffer DMA mode
Dedicated Tx FIFOs mode
file system registered
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
sp805-wdt f8a2c000.watchdog: registration successful
device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
scan edges:2 p2f:4 f2p:6
mix set temp-phase 1
scan elemnts: startp:81 endp:77
Tuning SampleClock. mix set phase:[01/07] ele:[09/14]
f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 DG4008 7.28 GiB
mmcblk0boot0: mmc0:0001 DG4008 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 DG4008 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 DG4008 partition 3 4.00 MiB
mmcblk0: p1(fastboot) p2(bootargs) p3(recovery) p4(swdevinfo) p5(baseparam) p6(pqparam) p7(logo) p8(fastplay) p9(kernel) p10(misc) p11(trustedcore) p12(securestore) p13(properties) p14(cache) p15(private) p16(otapackage_tmp) p17(system) p18(otapackage) p19(userdata)
f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 4096K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
hiahci-phy: registered new sata phy driver
input: Hi keyboard as /devices/virtual/input/input0
input: Hi mouse as /devices/virtual/input/input1
input: qwerty as /devices/virtual/input/input2
Hi Android vinput driver init successful!
hiotg: registered new interface otg driver
Registering sdcardfs 2.1.3
vdd-gpu: 700 <--> 1250 mV at 910 mV
Mali: Mali device driver loaded
usbcore: registered new interface driver snd-usb-audio
oprofile: using timer interrupt.
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
Performance counters on
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (14964 buckets, 59856 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Creating netns size=792 id=0
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11 drivers
Registering SWP/SWPB emulation handler
libphy: higmac_mii_bus: probed
No eth phy found at address 1
hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok
ALSA device list:
#0: HISI-AIAO
Freeing unused kernel memory: 616K (c11e5000 - c127f000)
init: /init.bigfish.rc: 55: invalid command 'getprop'
init: /init.bigfish.rc: 114: invalid option 'sdcard_r'
init: /init.bigfish.rc: 219: invalid option '//add'
init: /init.bigfish.rc: 371: invalid command '//insmod'
init: /init.bigfish.rc: 395: ignored duplicate definition of service 'logtousb'
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p19): recovery complete
EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p14): recovery complete
EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p15): recovery complete
EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p18): recovery complete
EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p12): VFS: Can't find ext4 filesystem
init: /dev/hw_random not found
healthd: wakealarm_init: timerfd_create failed
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/dongleservice', disabling 'dongleservice'
init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
sdcardfs: version 2.1.3
sdcardfs: dev_name -> /data/media
sdcardfs: options -> fsuid=1023,fsgid=1023,mask=0,userid=0,gid=1015,reserved_mb=20
sdcardfs: mounted on top of /data/media type ext4
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
random: init urandom read with 30 bits of entropy available
====write bit delay
======== Card detection to detect SDIO card! test========
===>insmod sdio detect ko
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Welcome to HiAndroid
ehci-platform: EHCI generic platform driver
ehci-platform f9890000.ehci: EHCI Host Controller
ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
ehci-platform f9890000.ehci: irq 98, io mem 0xf9890000
ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
ohci-platform f9880000.ohci: Generic Platform OHCI controller
ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
ohci-platform f9880000.ohci: irq 99, io mem 0xf9880000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
zram0: detected capacity change from 0 to 104857600
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
xhci-hcd f98a0000.xhci: irq 101, io mem 0xf98a0000
Adding 102396k swap on /dev/block/zram0. Priority:-1 extents:1 across:102396k SS
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
Disabling lock debugging due to kernel taint
Tuxera NTFS driver 3017.7.4.6 [Flags: R/W MODULE].
Built against headers 3.18.24_hi3798mv2x #1 SMP Mon Dec 11 18:33:22 CST 2017 arm
Running on kernel 3.18.24_hi3798mv2x #1 SMP Sun Apr 23 17:10:58 CST 2023 armv7l
init: sys_prop: permission denied uid:1000 name:ro.config.gfx2d_compose
ahci: probe of f9900000.hiahci failed with error -1
rtk_btusb: RTKBT_RELEASE_NAME: 20180824_TV_ANDROID_4.4(Beta)
rtk_btusb: Realtek Bluetooth USB driver module init, version 4.2.1
rtk_btusb: Register usb char device interface for BT driver
usbcore: registered new interface driver rtk_btusb
[14:39:52:954 ERROR-HI_TUNER]:select_demod_type[963]:unsupported demod type: 269
[14:39:52:961 ERROR-HI_TUNER]:tuner_select_type[1291]:select_demod_type error
card connected!
himciv200 f9c40000.himciv200.SD: card claims to support voltages below defined range
himciv300_wait_cmd_complete:729:
himciv200_2: wait cmd request complete is timeout!Raw interrupt status 0x00000000, CMD11(0)
himciv300_cur_status:111: [CRG:0X40103 CIU:0X0 BIU:0X0 RINT:0X0 STS:0X5906 IDSTS:0X0]
scan edges:1 p2f:4 f2p:5
mix set temp-phase 0
scan elemnts: startp:35 endp:28
Tuning SampleClock. mix set phase:[00/07] ele:[03/07]
mmc2: new ultra high speed SDR104 SDIO card at address 0001
binder: 1705:1983 ERROR: BC_REGISTER_LOOPER called without request
binder: 1705:1986 ERROR: BC_REGISTER_LOOPER called without request
binder: 1705:1988 ERROR: BC_REGISTER_LOOPER called without request
binder: 1705:1989 ERROR: BC_REGISTER_LOOPER called without request
===>retry 1 timebinder: 1705:1985 ERROR: BC_REGISTER_LOOPER called without request
s
binder: 1705:1982 ERROR: BC_REGISTER_LOOPER called without request
===>get pid_vid is 024C:B822
===>rtl8822BS
init: untracked pid 2181 exited
hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
lowmemorykiller: oom_adj 0 => oom_score_adj 0
lowmemorykiller: oom_adj 2 => oom_score_adj 117
lowmemorykiller: oom_adj 4 => oom_score_adj 235
lowmemorykiller: oom_adj 6 => oom_score_adj 352
lowmemorykiller: oom_adj 9 => oom_score_adj 529
lowmemorykiller: oom_adj 15 => oom_score_adj 1000
random: nonblocking pool is initialized
capability: warning: `dhcpcd' uses 32-bit capabilities (legacy support in use)
init: sys_prop: permission denied uid:1014 name:sys.net.dhcp.xid
init: sys_prop: permission denied uid:1014 name:sys.net.dhcp.pid
inputblock: disable block
init: untracked pid 1166 exited
init: sys_prop: permission denied uid:1000 name:persist.ijkplayer.timeout
`
以上是TTL的全部信息
不知道跑完没跑完，反正到最后一行代码，就不动了。。。试了N次都是到这里不动。
