一直刷机都是 Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Aug 17 2017 - 15:00:17
Reg Version: v1.5.0\
Reg Time: 2017/02/10 16:42:18
Reg Name: hi3798mv2dma_hi3798mv200_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
Bootrom success
System startup
Relocate Boot
Jump to C code
Fastboot 3.3.0-01820-g538f19d-dirty (root@HW-TV-S12) (Sep 27 2017 - 22:02:09)
MMC/SD controller initialization.
SDK Version: HiSTBAndroidV600R003C01SPC011_v20170909
Begin to show boot logo through Logo_Main.
HMT_read_bootlogo_count, bootlogo_count=0
HMT_write_bootlogo_count, bootlogo_count=1
Flash write result:0x800
Logo_Main End.
Net: eth0 phymdio(31) invalid, use default:0
upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address
SET BIT(40,0)==>x3
============== enter Android_Main ==============
======== HMT_IR_getKey start Second ========
get key value 0x0
MMC read: dev # 0, block # 249856, count 16800 ... 16800 blocks read: OK
88430748 Bytes/s
Found Initrd at 0x04000000 (Size 335267 Bytes), align at 16384 Bytes
Booting kernel from Legacy Image at 01ffffc0 ...
Image Name: Linux-3.18.24_hi3798mv2x
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 8124329 Bytes = 7.7 MiB
Load Address: 02000000
Entry Point: 02000000
XIP Kernel Image ... OK
OK
HMT_write_bootlogo_count, bootlogo_count=0
Flash write result:0x800
ATAGS [0x00000100 - 0x0000047C], 892Bytes
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
hisilicon-pcie f0001000.pcie: missing config reg space
hisilicon-pcie f0001000.pcie: PCIe Link Fail
FEPHY:addr=2, la_am=0xd, ldo_am=0x3, r_tuning=0x18
init: /init.bigfish.rc: 45: invalid command 'getprop'
init: /init.bigfish.rc: 110: invalid option 'sdcard_r'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: read misc boot info 1088/1088 bytes.
init: mount system image fail 0 times.
init: init: /system/bin/e2fsck
init: init: -v
init: init: -f
init: init: -y
init: init: /dev/block/mmcblk0p19
init: init: result is 256
init: not found file and directiry in customer path
init: property 'ro.hw.sys.zroid.path' doesn't exist while expanding '${ro.hw.sys.zroid.path}etc/init.thirdos.rc'
init: cannot expand '${ro.hw.sys.zroid.path}etc/init.thirdos.rc' while assigning to 'hmt_import'
init: property 'ro.hw.sys.zroid.path' doesn't exist while expanding '${ro.hw.sys.zroid.path}bin'
init: cannot expand '${ro.hw.sys.zroid.path}bin' while assigning to 'hmt_export'
init: property 'ro.hw.sys.zroid.path' doesn't exist while expanding '${ro.hw.sys.zroid.path}lib'
init: cannot expand '${ro.hw.sys.zroid.path}lib' while assigning to 'hmt_export'
init: /dev/hw_random not found
healthd: wakealarm_init: timerfd_create failed
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/basicService', disabling 'basicService'
init: cannot find '/system/bin/ontattr', disabling 'ontattr'
init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: cannot find '/system/bin/skyplayserver', disabling 'skyplayserver'
init: cannot find '/system/bin/dlnaserver', disabling 'dlnaserver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
healthd: No charger supplies found
Bootrom startFailed to send type frame. It may be caused by the following reasons:
- The board is not powered on or off again;
- The selected serial port is incorrect;
- The bootstrap function of the chip OTP is disabled.
Failed to download fastboot!
请问有没有高手也出现这样情况 谢谢
