- 盒子型号：cm201-2
- 刷机固件：hi3798mv300-mv3dmw
- 刷机方式：ttl
- 遇到的问题：ttl正常刷入固件后，重启启动盒子 ，板子不亮灯。hdmi输出黑屏
刷机前
刷机前 安卓固件 ttl跑码截图：
hitool刷机截图：
ttl刷入固件后，重新上电。
刷机后
ttl正常刷入固件后，重启启动盒子 ，板子不亮灯。hdmi输出黑屏
- ttl跑码
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:56:56
Reg Version: v1.5.0\
Reg Time: 2017/12/19 19:06:24
Reg Name: hi3798mv3dms1_hi3798mv300_DDR3-1866_1GB_16bitx2_2layers.reg
dms board
Boot auxiliary code success
Bootrom success
System startup
Relocate Boot
Jump to C code
Fastboot 3.3.0_ecoo_83100468-bbs-ecoo-top (teasiu@ecoo) (Oct 04 2022 - 18:00:45)
Fastboot: Version 3.3.0
Build Date: Oct 4 2022, 18:01:26
CPU: Hi3798Mv300
Boot Media: eMMC
DDR Size: 1GB
MMC/SD controller initialization.
scan edges:2 p2f:5 f2p:7
mix set temp-phase 2
scan elemnts: startp:112 endp:105
Tuning SampleClock. mix set phase:[02/07] ele:[12/16]
MMC/SD Card:
MID: 0xe9
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7492M Bytes (High Capacity)
Name: "A90SKB"
Chip Type: MMC
Version: 5.0
Speed: 100000000Hz
Mode: HS400
Voltage: 1.8V
Bus Width: 8bit
Boot Addr: 0 Bytes
Net: upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
SDK Version: HiSTB_NAS20220702
盒子背面照 + 板子照片
