串口已经连接，请给单板上电，若已经上电，请断电后重新上电。
Bootrom start
Boot Media: eMMC
########################################################################### ---- 9%
############Failed to send the boot data.
#1. The system fails to run properly due to an error in boot code compilation.
- If the secure boot function is disabled and boot rootkey is set for the OEM, the boot image is encrypted, but the boot rootkey used for encrypting the boot is different from the boot rootkey burnt to the OTP.
Timeout error.
- The chip OTP is set to forcibly decrypt the boot image. However, the boot is not correctly encrypted.
- The board DDR is faulty.
#5. The boot code does not support the type of the flash memory to be burnt. If the boot print function is enabled, you can view the printing information through the serial port, showing that the current flash memory type is not supported.
Failed to send the data frame.
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:56:56
Reg Version: v1.5.3\
Reg Time: 2018/01/18 10:27:05
Reg Name: hi3798mv3dmw_hi3798mv300_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
?0!00
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:56:56
Reg Version: v1.5.3\
Reg Time: 2018/01/18 10:27:05
Reg Name: hi3798mv3dmw_hi3798mv300_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
Bootrom success
System startup
Relocate Boot
Jump to C code
Fastboot 3.3.0_ecoo_83100468-bbs-ecoo-top (teasiu@ecoo) (Oct 04 2022 - 18:01:59)
Fastboot: Version 3.3.0
Build Date: Oct 4 2022, 18:02:42
CPU: Hi3798Mv300
Boot Media: eMMC
DDR Size: 1GB
MMC/SD controller initialization.
scan edges:2 p2f:6 f2p:8
mix set temp-phase 3
scan elemnts: startp:172 endp:152
Tuning SampleClock. mix set phase:[03/07] ele:[08/22]
MMC/SD Card:
MID: 0x15
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name: "8GME4R"
Chip Type: MMC
Version: 5.1
Speed: 100000000Hz
Mode: HS400
Voltage: 1.8V
Bus Width: 8bit
Boot Addr: 0 Bytes
Net: upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
SDK Version: HiSTB_NAS20220702
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:56:56
Reg Version: v1.5.3\
Reg Time: 2018/01/18 10:27:05
Reg Name: hi3798mv3dmw_hi3798mv300_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
Bootrom success
System startup
Relocate Boot
Jump to C code
Fastboot 3.3.0_ecoo_83100468-bbs-ecoo-top (teasiu@ecoo) (Oct 04 2022 - 18:01:59)
Fastboot: Version 3.3.0
Build Date: Oct 4 2022, 18:02:42
CPU: Hi3798Mv300
Boot Media: eMMC
DDR Size: 1GB
MMC/SD controller initialization.
scan edges:2 p2f:6 f2p:8
mix set temp-phase 3
scan elemnts: startp:173 endp:152
Tuning SampleClock. mix set phase:[03/07] ele:[08/22]
MMC/SD Card:
MID: 0x15
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name: "8GME4R"
Chip Type: MMC
Version: 5.1
Speed: 100000000Hz
Mode: HS400
Voltage: 1.8V
Bus Width: 8bit
Boot Addr: 0 Bytes
Net: upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
SDK Version: HiSTB_NAS20220702
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:56:56
Reg Version: v1.5.3\
Reg Time: 2018/01/18 10:27:05
Reg Name: hi3798mv3dmw_hi3798mv300_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
Bootrom success
System startup
Relocate Boot
Jump to C code
Fastboot 3.3.0_ecoo_83100468-bbs-ecoo-top (teasiu@ecoo) (Oct 04 2022 - 18:01:59)
Fastboot: Version 3.3.0
Build Date: Oct 4 2022, 18:02:42
CPU: Hi3798Mv300
Boot Media: eMMC
DDR Size: 1GB
MMC/SD controller initialization.
scan edges:2 p2f:6 f2p:8
mix set temp-phase 3
scan elemnts: startp:173 endp:153
Tuning SampleClock. mix set phase:[03/07] ele:[09/22]
MMC/SD Card:
MID: 0x15
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name: "8GME4R"
Chip Type: MMC
Version: 5.1
Speed: 100000000Hz
Mode: HS400
Voltage: 1.8V
Bus Width: 8bit
Boot Addr: 0 Bytes
Net: upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
SDK Version: HiSTB_NAS20220702
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:56:56
Reg Version: v1.5.3\
Reg Time: 2018/01/18 10:27:05
Reg Name: hi3798mv3dmw_hi3798mv300_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
Bootrom success
System startup
Relocate Boot
Jump to C code
Fastboot 3.3.0_ecoo_83100468-bbs-ecoo-top (teasiu@ecoo) (Oct 04 2022 - 18:01:59)
Fastboot: Version 3.3.0
Build Date: Oct 4 2022, 18:02:42
CPU: Hi3798Mv300
Boot Media: eMMC
DDR Size: 1GB
MMC/SD controller initialization.
scan edges:2 p2f:6 f2p:8
mix set temp-phase 3
scan elemnts: startp:173 endp:153
Tuning SampleClock. mix set phase:[03/07] ele:[09/22]
MMC/SD Card:
MID: 0x15
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name: "8GME4R"
Chip Type: MMC
Version: 5.1
Speed: 100000000Hz
Mode: HS400
Voltage: 1.8V
Bus Width: 8bit
Boot Addr: 0 Bytes
Net: upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
SDK Version: HiSTB_NAS20220702
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:56:56
Reg Version: v1.5.3\
Reg Time: 2018/01/18 10:27:05
Reg Name: hi3798mv3dmw_hi3798mv300_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
Bootrom success
System startup
Relocate Boot
Jump to C code
Fastboot 3.3.0_ecoo_83100468-bbs-ecoo-top (teasiu@ecoo) (Oct 04 2022 - 18:01:59)
Fastboot: Version 3.3.0
Build Date: Oct 4 2022, 18:02:42
CPU: Hi3798Mv300
Boot Media: eMMC
DDR Size: 1GB
MMC/SD controller initialization.
scan edges:2 p2f:6 f2p:8
mix set temp-phase 3
scan elemnts: startp:173 endp:153
Tuning SampleClock. mix set phase:[03/07] ele:[09/22]
MMC/SD Card:
MID: 0x15
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name: "8GME4R"
Chip Type: MMC
Version: 5.1
Speed: 100000000Hz
Mode: HS400
Voltage: 1.8V
Bus Width: 8bit
Boot Addr: 0 Bytes
Net: upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
SDK Version: HiSTB_NAS20220702
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
Enter boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Nov 29 2017 - 19:56:56
Reg Version: v1.5.3\
Reg Time: 2018/01/18 10:27:05
Reg Name: hi3798mv3dmw_hi3798mv300_DDR3-1866_1GB_16bitx2_2layers.reg
Boot auxiliary code success
Bootrom success
System startup
Relocate Boot
Jump to C code
Fastboot 3.3.0_ecoo_83100468-bbs-ecoo-top (teasiu@ecoo) (Oct 04 2022 - 18:01:59)
Fastboot: Version 3.3.0
Build Date: Oct 4 2022, 18:02:42
CPU: Hi3798Mv300
Boot Media: eMMC
DDR Size: 1GB
MMC/SD controller initialization.
scan edges:2 p2f:6 f2p:8
mix set temp-phase 3
scan elemnts: startp:173 endp:153
Tuning SampleClock. mix set phase:[03/07] ele:[09/22]
MMC/SD Card:
MID: 0x15
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name: "8GME4R"
Chip Type: MMC
Version: 5.1
Speed: 100000000Hz
Mode: HS400
Voltage: 1.8V
Bus Width: 8bit
Boot Addr: 0 Bytes
Net: upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address
Boot Env on eMMC
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
SDK Version: HiSTB_NAS20220702
Failed to download fastboot!
